JAPANESE   |   ENGLISH
 
RIVET SETTER
Fastening Catalog   >   RIVET SETTER
 
Fukui Byora's rivet setter that meets diversified needs
Specifications
 
Model RS512 RS620 RS305
RIVET SETTER PHOTO RIVET SETTER picture RS512 RIVET SETTER picture RS620 RIVET SETTER picture RS305
Source voltage Single-phase 100 VAC Three-phase 200 VAC Three-phase 200 VAC
Power consumption (W) 200 400 400
Drive system Pressurizing by cam Pressurizing by cam Pressurizing by flywheel
Takt time(S) 50Hz 0.5 0.6 0.4
60Hz 0.4 0.5 0.3
Allowable pressurization load (kN) 7 15 15
Machine dimensions Dimensions (mm) W350 X D590 X H750  W600 X D800 X H1720 W600 X D870 X H1550
Arm length (mm) 200 (300 or 400) 320 (400) 320 (400)
Work height (mm) 280 967 967
Weight (kg) 109 300 310
Applicable rivet size Semitubular SW or BS Shank diameter 1.6 ~ 4 Max length L 12(20) Shank diameter 3 ~ 6 Max length L 15(25) Shank diameter 3 ~ 6 Max length L 15(30)
SUS 1.6 ~ 3 3 ~ 5 3 ~ 4
AL or CU 1.6 ~ 5 3 ~ 6 3 ~ 6
Selfpiercing SW Shank diameter 2 Max length L Standard size Shank diameter 3 ~ 3.6 Max length L Standard size Shank diameter 3 ~ 3.6 Max length L Standard size
SUS 2 3 ~ 3.5 3 ~ 3.5
 
Note) (1) The figures in ( ) are optional sizes.
(2) In the case of shaft diameter of 1.6 mm, the special specification may be adopted depending on type of material or length L.
(3) Trial fastening may be required depending on fastening conditions (please ask us in advance).
(4) The specifications above are subject to change without notice.
(5) When a SUSXM7 self-piercing rivet with a shaft diameter of 2xL is needed, please ask us in advance.
 
 
 
Optional specifications
 
Code Description Code Description
30BR Arm length 300 mm (for RS512 only) ALU ALU Pilot pin lockup system (pneumatic)
40BR Arm length 400 mm (for all the models) MLU Pilot pin lockup system (mechanical)
AH Automatic hopper PS Punch up/down slide mechanism
PF Parts feeder ARP Rivet forced insertion system
L L-spec: Length L up to 4 times the shank diameter ARE Pneumatic escape system
LL LL-spec RS512 Length L: 15 to 24 mm E Power supply specification (e.g., overseas)
RS305 Length L: 15 to 30 mm SP Spotlight
RS620 Length L: 15 to 25 mm T2 Wheeled table (for desktop type)
 
Remarks) The standard specification of our rivet setter is based on the JIS B 1215 low round head rivet fastening. When the standardized JIS B 1215 rivet has the head other than low round or the dimensions partially different from the specification (e.g., hole diameter), it shall be handled as optional specification.
 
 
 
Rivet setter safety devices
Workpiece holder Lockup curling set Two-hand control button switch Shutter-type safety device Photoelectric safety device
Workpiece holder Lockup curling set Two-hand control button switch Shutter-type safety device Photoelectric safety device
 
Remarks) All the safety devices above are optional extras.
 
 
 
PDF DOWNLOAD
 
RIVET SETTER CATALOG
RIVET SETTER CATALOG   View the Catalog (PDF FILE)

【RIVET SETTER CATALOG CONTENTS】

■ Rivet Setter Specifications

 

■ Rivet Setter Optional specifications

■ Rivet setter safety devices

   
     
@Contact us for more information about our products.

(Feel free to contact us to discuss your requirements for fastening, check our inventory,
or inquire about any other interests you may have.)

Frequently Asked Questions