Characteristics :
Example of a high precision part with very tight concentricity tolerances between the threaded portion and the shank.
Characteristics :
Example of a part with a cold formed worm gear.
Characteristics :
Example of a part with a cold formed worm gear.
Characteristics :
Example of a part used as a lead screw.
Characteristics :
Example of a part with a spherical tip and a straight-knurled section.
Characteristics :
Example of a part with two straight-knurled sections.
Characteristics :
Example of a part with a diamond-knurled section.
Characteristics :
Example of a diamond-knurled part (without flanges).
Characteristics :
Example of a part with a ring-knurled section.
Characteristics :
Example of a part with two knurled sections.
Characteristics :
Example of a part with a spiral-knurled section and a sharp tip.
Characteristics :
Example of a spiral-knurled part.
Characteristics :
Example of a thin-walled hollow part with a groove.
Characteristics :
Example of a part with two grooves.
Characteristics :
Example of a part with multiple grooves (three grooves).
Characteristics :
Example of a part with a rounded groove.
Characteristics :
Example of a part with two different diameter threaded sections.
Characteristics :
Example of a part with two knurled sections and a threaded section.
Characteristics :
Example of a part with a spherical tip.
Characteristics :
Example of a part with a spherical tip and no flanges.
Characteristics :
Example of a part with a thick (high-material volume) flange with a groove around it and a sharp tip.
Characteristics :
Example of a part with a sharp tip.
Characteristics :
Example of a part with a sharp tip.
Characteristics :
Example of a cold formed part with a tip made using a secondary process.
Characteristics :
Example of a cold formed part with a tip made using a secondary process.
Characteristics :
Example of a part with a screw driver tip.
Characteristics :
Example of a part made with a combination of bending, flattening, and trimming.
Characteristics :
Example of a part that has only its tip section metal plated.
Characteristics :
Example of a part bent into a U-shape.
Characteristics :
Example of a part made with two flanges and bent into a U-shape.
Characteristics :
Example of a part with a U-shaped bend and a flattened tip.
Characteristics :
Example of a part bent into a U-shape.
Characteristics :
Example of a part bent in multiple directions with a flattened tip.
Characteristics :
Example of a part bent in multiple directions with a cold formed box-shaped end.
Characteristics :
Example of a part bent in multiple directions.
Characteristics :
Example of a part bent in multiple directions.
Characteristics :
Example of a part created using flattening and trimming.
Characteristics :
Example of a finned part.
Characteristics :
Example of a finned part with a square shank.
Characteristics :
Example of a finned part with a L-shaped bend.
Characteristics :
Example of a thin shank (0.7 diameter) with a flattened section.
Characteristics :
Example of a part with anti-rotation fins.
Characteristics :
Example of a shank with flattened side sections.
Characteristics :
Example of a shank with rounded indents on both sides and flattened tips at both ends.
Characteristics :
Example of a part with a combination of cold forming and machining.
Characteristics :
Example of a part with a combination of cold forming and machining.
Characteristics :
Example of an assembly with two parts fastened together.
Characteristics :
Example of parts mounted to a metal band.
Characteristics :
Example of a part with plastic molded around its head.
Characteristics :
Example of a part with plastic molded around its groove.