▸ Products Menu   |  Product Examples   |  Products by Shape / Manufacturing Process   |  Fasteners and Rivets   |  FAQ  |
Products by Shape / Manufacturing Process
Home > Products > Products by Shape / Manufacturing Process > 7. Other Processes
7. Other Processes

Deep Drawing

Cold Forming | Cold Heading | Products Sample

  • Material : Stainless
  • Surface treatment : Other
  • Characteristics :

    Example of a thin-walled hollow part with a square side hole.
    Wall Thickness: 0.15 mm.

Deep Drawing

Cold Forming | Cold Heading | Products Sample

  • Material : Stainless
  • Surface treatment : Other
  • Characteristics :

    Example of a thin-walled hollow stainless steel part with a through hole.
    Wall Thickness: 0.1 mm

Sheet-metal

Cold Forming / Products Sample:1D763

  • Material :Copper/Brass
  • Surface treatment : Other
  • Characteristics :

    Example of a part forged from sheet metal.

Sheet-metal

Cold Forming / Products Sample:0J180

  • Material : Copper/Brass
  • Surface treatment : Other
  • Characteristics :

    Example of a part forged from sheet metal.

Ultraprecision

Cold Forming / Products Sample:0P165

  • Material : Copper/Brass
  • Surface treatment : Gold / Silver
  • Characteristics :

    Part with a 0.6mm diameter shank with a 0.35mm diameter hole and a 2.5mm diameter head.

Ultraprecision

Cold Forming / Products Sample:0F238

  • Material : Copper/Brass
  • Surface treatment : Gold / Silver
  • Characteristics :

    Example of a 0.5×0.5mm square shanked bent into an L-shape.

Ultraprecision

Cold Forming / Products Sample:0P165

  • Material :Copper/Brass
  • Surface treatment : Other
  • Characteristics :

    Example of a 1.2×1.2mm square shank with a through hole.

Ultraprecision

Cold Forming / Products Sample:0F238

  • Material : Copper/Brass
  • Surface treatment : Tin
  • Characteristics :

    Example of part with a 0.4×0.4mm square shank.

Ultraprecision

Cold Forming | Products Sample

  • Material :Kovar
  • Surface treatment : Tin
  • Characteristics :

    Example of a part with a 0.46mm diameter shank,two flanges and a geared tip at one end.

Ultraprecision

Cold Forming / Products Sample

  • Material : Copper
  • Surface treatment : Tin
  • Characteristics :

    Example of a part with two different diameter flanges.

Ultraprecision

Cold Forming | Products Sample

  • Material :Copper
  • Surface treatment : Nickel
  • Characteristics :

    A part with a 0.7 diameter shank with a 0.5mm diameter hole in it and protrusions on the underside of a D-shaped flange.

Ultraprecision

Cold Forming / Products Sample

  • Material : Stainless
  • Surface treatment : Other
  • Characteristics :

    Example of a part with very tight tolerances.
    Diameter tolerance range: 0.03mm
    Thickness tolerance range: 0.024mm

Ultraprecision

Cold Forming / Products Sample

  • Material : Kovar
  • Surface treatment :Gold / Silver
  • Characteristics :

    Example of a part with a 0.3mm diameter shank made from Kovar.

Ultraprecision

Cold Forming | Products Sample

  • Material :Copper
  • Surface treatment :Nickel
  • Characteristics :

    Example of a 0.77mm diameter shank with a D-shaped flange.

Ultraprecision

Cold Forming / Products Sample

  • Material :Copper
  • Surface treatment :Tin
  • Characteristics :

    Example of 0.4mm diameter spherical part.

Special Material

Cold Forming | Products Sample

  • Material : Titanium
  • Surface treatment : Other
  • Characteristics :

    Example of a part made from titanium and that has a groove at its tip.

Special Material

Cold Forming / Products Sample

  • Material : Ni & Al Clad Material
  • Surface treatment : Other
  • Characteristics :

    Example of a clad metal part.

PAGE TOP